Parking control solutions
CCTV Solutions
Find on this site:
Online Flap Barrier Access System
System overview:
Components:
Feature:
1. Front LCD indicator.
2. Bi-directional access control ( can enter from both end, and each end can be configured to be free or prohibited or controlled access).
3. Automatic card id report by reader through Ethernet interface.
4. All the Flap Barrier can be managed by center computer through TCP/IP network. Monitor the events of the Flap Barrier, Operate (open, close etc.) the Flap Barrier.
5. Every flap barrier must work online(with connection to the center computer).
6. Flap barrier can detect logical connection automatically, if the logical it is disconnected, it will connect it automatically, so you do not need to do it by yourself.
7. Flap barrier can detect physical connection (Between computer and Flap Barrier.), if the physical connection is disconnected, the system will return a alarm per second until physical connection is ok.
8. Fail safe, which means the flap(wing) will be opened when power off (or fail secure, which means the arm will be closed when power off ) .
9. Auto-close function, which means the flap(wing) will be closed after opening when legal time is over if no one pass by.
10. Anti-clamping, which means the flap(wing) will be remained opened if a people standing in the middle of the two flaps until (s)he leaves.
11. Tail-after alarm(customized, using infrared detector)
Notice, the two objects passing through interval in between should exceed 1 second(default) otherwise the gate would regard these two objects belong to one person, because people are easily taking big luggage together with when they are traveling. Tail-after alarm default time could only be set up in factory.
12. Wrong direction access alarm, which means gate will alarm if a person tries to enter from left direction when another person presents an authorized card(or any other authorized signal) from the right direction, and vise versa.
13. Illegal invasion alarm, which means the gate will alarm if a people tries to invade when (s)he doesn't present an authorized card(or any other authorized signal).
14. The system is easy to update by just adding new barriers to the TCP/IP network.
15. The software for system manage is easy to use.
16. Supply C++ SDK for integrating the Flap Barrier with other system through Ethernet interface
Paramenter:
Embedded RFID reader frequency: 125KHz. ( or 13.56M Mifare optional )
Dimensions:1200×1000×300mm( Default, size could be customized ),
Wing width: 300mm
Cabinet material:304# stainless steel with thickness 1.2mm
Packaging weight:85Kg/ 187Lbs
Net weight: 55Kg/ 120Lbs
Wing material: Acrylic(15mm, 18mm, 20mm ), customized available.
Surface process: brush finished
Power requirement: AC220V 50Hz or AC120V 60Hz
Working temperature:-30℃-60℃
Working humidity: 5-95%
Maximum width for a passage: standard 700mm
RJ45 Ethernet interface
Components:
| ACC-202A.net(Left) | ACC-202A.net (Middle) | ACC-202A .net(right) | ||
 |
 |
 |
1. Front LCD indicator.
2. Bi-directional access control ( can enter from both end, and each end can be configured to be free or prohibited or controlled access).
3. Automatic card id report by reader through Ethernet interface.
4. All the Flap Barrier can be managed by center computer through TCP/IP network. Monitor the events of the Flap Barrier, Operate (open, close etc.) the Flap Barrier.
5. Every flap barrier must work online(with connection to the center computer).
6. Flap barrier can detect logical connection automatically, if the logical it is disconnected, it will connect it automatically, so you do not need to do it by yourself.
7. Flap barrier can detect physical connection (Between computer and Flap Barrier.), if the physical connection is disconnected, the system will return a alarm per second until physical connection is ok.
8. Fail safe, which means the flap(wing) will be opened when power off (or fail secure, which means the arm will be closed when power off ) .
9. Auto-close function, which means the flap(wing) will be closed after opening when legal time is over if no one pass by.
10. Anti-clamping, which means the flap(wing) will be remained opened if a people standing in the middle of the two flaps until (s)he leaves.
11. Tail-after alarm(customized, using infrared detector)
Notice, the two objects passing through interval in between should exceed 1 second(default) otherwise the gate would regard these two objects belong to one person, because people are easily taking big luggage together with when they are traveling. Tail-after alarm default time could only be set up in factory.
12. Wrong direction access alarm, which means gate will alarm if a person tries to enter from left direction when another person presents an authorized card(or any other authorized signal) from the right direction, and vise versa.
13. Illegal invasion alarm, which means the gate will alarm if a people tries to invade when (s)he doesn't present an authorized card(or any other authorized signal).
14. The system is easy to update by just adding new barriers to the TCP/IP network.
15. The software for system manage is easy to use.
16. Supply C++ SDK for integrating the Flap Barrier with other system through Ethernet interface
Paramenter:
Embedded RFID reader frequency: 125KHz. ( or 13.56M Mifare optional )
Dimensions:1200×1000×300mm( Default, size could be customized ),
Wing width: 300mm
Cabinet material:304# stainless steel with thickness 1.2mm
Packaging weight:85Kg/ 187Lbs
Net weight: 55Kg/ 120Lbs
Wing material: Acrylic(15mm, 18mm, 20mm ), customized available.
Surface process: brush finished
Power requirement: AC220V 50Hz or AC120V 60Hz
Working temperature:-30℃-60℃
Working humidity: 5-95%
Maximum width for a passage: standard 700mm
RJ45 Ethernet interface
You may be also interested in more solutions
